Xcelerator specification and feature summary

Business telephone system

The specification and feature summary of the Xcelerator IP telephone system includes the following.

  • Automatic failover to PSTN
  • Adaptive Jitter Buffer
  • Automatic fall-back to PSTN line calling if power fails
  • Automatic registration with IP2007 endpoint
  • Call Operator
  • Call Progress Tone Generation/Detection
  • Call Routing
  • Caller ID Name & Number
  • Caller ID to Extension
  • Comfort Noise Generation (CNG)
  • Data Protocols: DHCP, TFPT, RTP, SIP
  • Daylight Saving Time
  • Default Set
  • Direct Inward System Access (DISA)
  • DTMF Relay (RFC2833)
  • Extension Password
  • Fax/Modem 2100 Hz Tone Detection
  • Voicemail (4 hours, G.729a)

  • Echo Cancellation: G.168 for each voice line
  • Flash — Analog Port (SLT) Flash Recognition
  • G.168 Line Echo Cancellation
  • Integrated voicemail
  • Line Group Assignment
  • Multi-Line Appearance
  • Music On Hold
  • NAT and Routing Functions
  • Night Switching
  • 999 on CO Trunks
  • Numbering Plan
  • System Data & Time
  • System Speed Dial Capacity: 100 entries
  • Transfer
  • Trunk Group
  • Voice Activity Detection (VAD)

 

Wireless access point / Data networking / Internal firewall / Internet access

The specification and feature summary of the Xcelerator IP Gateway includes;

  • LAN Interface: 4 Ethernet 10/100BaseT (via RJ45 connectors)
  • Supports 8 VoIP SIP trunks and 3 FXO Standard Analog trunks via RJ11C (Loop Start)
  • SIP proxy
  • VoIP: SIP v2 (RFC3261), G.711, G.729A, and G.723.1 (optional)
  • IP Address Assign (DHCP)
  • IP QoS (802.1p, VLAN, Priority Queue based on ToS tag)
  • WAN Data Port (10/100BaseT); Access via External Cable/ADSL for Broadband Data
  • TCP/IP Protocols
  • Firewall functions:
    • IP/Port/Interface Filtering Rules;
    • Port Triggering; Port Forwarding;
    • DMZ Host; 
    • MAC Layer Filtering;
    • NAT with STUN
  • Power over Ethernet (PoE) 802.3af
  • Supports up to 24 SIP Voice Terminals, both wired (expand with PoE switch) and wireless via  Ethernet or built-in 802.11g Wi-Fi Access Point
  • 1 FXS (RJ11) for Analog device
  • Remote Administration via 802.11G Wi-Fi or Ethernet

 

IP2007 IP telephone

The specification and feature summary of the IP2007 telephone includes;

  • Automatic registration with Xcelerator IP
  • Blind Transfer
  • Call Forward
  • Always Forward
  • Busy Forward
  • No Answer Forward
  • Call Log
  • Call Park, Park Retrieve
  • Caller ID Name & Number Displayed
  • Conferencing (3 parties)
  • Daylight Savings Time
  • Dial Plan
  • Directory Dial
  • Do Not Disturb
  • Dual Ethernet ports
  • E-mail Notification of voicemail Message
  • External Paging
  • Feature Key Programming
  • Group Paging

 

ICON footer
ICON Social Media
Bookmark and Share